Allen, L., et al. (2006). “What Dangers Do We Face? A Preliminary Multihazard Risk Profile for New York State,” under supervision from Dr. Ernest Sternberg, University at Buffalo, Department of Urban and Regional Planning Graduate Workshop, Fall, MCEER-07-SP01, May 7, 2007.
Agrawal, A. K., Pan, Y., and Alampalli, S. (2008). “Effects of Retrofits on Seismic Fragility of Multi-Span Continuous Steel Highway Bridges in New York State,” Proceedings, Sixth National Seismic Conference on Bridges & Highways, Charleston, SC, July 27-30, 2008.
Choi, E., DesRoches, R., Nielson, B. (2004). “Seismic fragility of typical bridges in moderate seismic zones,” Engineering Structures, 26:187-199.
Cluff, Lloyd. S. (2007). “Effects of the 2004 Sumatra-Andaman Earthquake and Indian Ocean Tsunami in Aceh Province,” Pacific Gas and Electric Company, USA, Bridge, 37:1, Spring 2007, pp. 12-16, MCEER VF01847, ISSN: 0737-6278
Earthquake Engineering Research Institute, Earthquake Response Plan and Field Guide, Publication No. 91-1, National Science Foundation, Grant #CES882236.
FHWA (1995). “Recording and Coding Guide for the Structure inventory and Appraisal of the Nation’s Bridges,” Office of Engineering Bridge Division, Report FHWA-PD-96-001, December.
FHWA, Missouri Department of Transportation, (2002). Post-Earthquake Highway Response & Recovery Seminar, Adams Mark Hotel, St. Louis, MO, September 5-8, 2000.
Filiatrault, A., et al. (1993). “A rapid seismic Screening procedure for existing bridges in Canada,” Can. J. Civ. Eng., 21, 1994, pp.626-642.
Fridley, K. J., and Ma, Z. (2007). “Reliability-Based Design of Seismic Retrofit for Bridges,” The University of Alabama, Department of Civil, Construction, and Environmental Engineering, WADOT, WA-RD-664.1, February 2007.
Hwang, H., Liu, J. and Chiu, Y. (2001). “Seismic fragility analysis of highway bridges,” Technical Rep., Center for Earthquake Research and Information, University of Memphis, Memphis, TN.
Malone, S., et al., (2005). “Information Tools to Improve Post-Earthquake Prioritization of WSDOT Bridge Inspections,” Washington State Transportation Center (TRAC), Final Research Report, Agreement T2695, Task 37, Earthquake Bridge Inspection, Special Report Federal Highway Administration, June.
Mitronovas, W., and Nottis, G.N. (1993). “A historical look at earthquakes in the northeast,” Proc. “Earthquakes in the Northeast-Are We Ignoring the Hazard? Workshop on Earthquake Science and Safety Educators, Technical Report NCEER-93-0005, Buffalo, N.Y.
Nielson, B., DesRoches, R. (2007). “Analytical Seismic Fragility Curves for Typical Bridges in the Central and Southeastern United State,” Earthquake Spectra, 23:3, pp 615-633, August, EERI.
Nielson, B., DesRoches, R. (2007). “Seismic Performance Assessment of Simply Supported and Continuous Multispan Concrete Girder Highway Bridges,” Journal of Bridge Engineering, (ASCE), September/October.
Nielson, Bryant G., DesRoches, Reginald (2007). “Analytical Seismic Fragility Curves for Typical Bridges in the Central and Southeastern United States,” Earthquake Spectra, 23(3), pp. 615-633, August.
Nikolaou, S. (2005). “Geographic information systems for ground motion evaluation in seismic bridge analysis,” ISSN 1573-2487, Bridge Structures, 1(3), September 2005, pp. 293-306.
O'Connor, J. (2005). "Seismic Risk Assessment Procedures and Mitigation Measures for Highway Bridges in Moderate Earthquake Zones of the Eastern U.S.," Proceedings of the 3rd US-PRC Workshop on Seismic Analysis and Design of Special Bridges, Shanghai, China, MCEER-05-0003, pp. 171-184, April.
Padgett, J. E. and DesRoches, R. (2007). “Bridge Functionality Relationships for Improved Seismic Risk Assessment of Transportation Networks,” Earthquake Spectra, 23(1), pp.115-130, February 2007, EERI.
Padgett, J., and DesRoches, R. (2007). “Bridge Functionality Relationships for Improved Seismic Risk Assessment of Transportation Networks,” Earthquake Spectra, 23(1), pp. 115-130, February.
Padgett, J., DesRoches, R. (2007). Bridge Functionality Relationships for Improved Seismic Risk Assessment of Transportation Networks,” Earthquake Specra, 23:1, pp. 115-130, February, EERI.
Pan, Y. (2006). “Seismic fragility and risk management of highway bridges in New York state.” Ph.D. dissertation, City University of New York, New York.
Pan, Y., Agrawal, A.K., and Ghosn, M. (2007). “Seismic Fragility of Continuous Steel Highway Bridges in New York State,” Journal of Bridge Engineering (ASCE), November/December, pp 689-699.
Poland, C.D. and Malley, J.O. (1992). “A Procedure for the Seismic Evaluation of Buildings in the Central and Eastern United States,” National Center for Earthquake Engineering Research, SUNY, University at Buffalo, Technical Report NCEER-92-0008, April 2, 1998.
Ramirez, J. et al. (2000). Field Guide for the Post-Earthquake Safety Evaluation of Bridges and Roads, Purdue University, School of Engineering, JTRP Contract No. 2377, INDOT, March 2000.
Ramirez, J. et al. (2000). Handbook for the Post-Earthquake Safety Evaluation of Bridges and Roads, Purdue University, School of Engineering, JTRP Contract No. 2377, INDOT, March 2000.
Ramirez, J. et al. (2000). Post-Earthquake Safety Evaluation of Bridges and Roads Workshop, Purdue University and Joint Transportation Research Board, March 6-7, 2000.
Ranf, R.T., and Malone, S. (2007). “Post-earthquake Prioritization of Bridge Inspections,” Earthquake Spectra, 23(1), pp. 131-146, February 2007, EERI.
Ritchie, P. Kauhl N. and Kulicki, J. (1999). “Critical Seismic Issues for Existing Steel Bridges,” MCEER-99-0013, July 20, 1999, FHWA DTFH61-92-C-00106.
Ross, K.E.K. ed. (1993). "Earthquakes in the Northeast - Are We Ignoring the Hazard? A Workshop on Earthquake Science and Safety for Educators," NCEER-93-0005, 4/2/93, (PB94-103066, A09, MF-A02).
Shirolé, A.M., andMalik, A. H., (1993). “Seismic Retrofitting of Bridges in New York State,” Proceedings, Symposium on Practical Solutions for Bridge Strengthening & Rehabilitation, Iowa State Univ., Ames, Iowa, pp. 123-131.
Sullivan, Mike ????
Weidlinger Associates, (1998). “New York City seismic hazard study and its engineering applications,” Final Rep., New York.
Werner, S.D., Taylor, C.E., Moore III, J.E., Walton, J.S., Cho, S. (2000). “A Risk-Based Methodology for Assessing the Seismic Performance of Highway Systems,” MCEER-00-0014, 12/31/00, (PB2001-108756, A14, MF-A03).
Yamazaki, F., Hamada, T., Motoyama, H., and Yamauchit, H. (1999). “Earthquake damage assessment of expressway bridges in Japan,” Optimizing Post-Earthquake lifeline System Reliability, ASCE Proc., 5th U.S. Conf. on Lifeline Earthquake Engineering, Seattle, pp. 361-370.
Yanev, B. and Tran D. (1997). “Prioritizing New York City Bridges According to Earthquake Hazard Criteria,” Economic Consequences of Earthquakes: Preparing for the Unexpected, Jones, Barclay G. ed.,NCEER-SP-0001, January 1997, pp. 155-166
Youd, T. L. (1998). “Screening Guide for Rapid Assessment of Liquefaction Hazard at Highway Bridge Sites,” MCEER-98-0005, 6/16/98, (PB99-118879, A06, not available on microfiche).
Petersen, Mark D., Frankel, Arthur D., Harmsen, Stephen C., Mueller, Charles S., Haller, Kathleen M., Wheeler, Russell L., Wesson, Robert L., Zeng, Yuehua, Boyd, Oliver S., Perkins, David M., Luco, Nicolas, Field, Edward H., Wills, Chris J., and Rukstales, Kenneth S., (2008), Documentation for the 2008 Update of the United States National Seismic Hazard Maps: U.S. Geological Survey Open-FileReport 2008–1128, 61 p.42